Chevrolet Camaro - 1st Gen

First-generation Camaro debuted in September 1966, for the 1967 model year, up to 1969 on a new rear-wheel drive GM F-body platform and would be available as a 2-door, 2+2 seating, coupé or convertible with a choice of 250 cu in (4.1 L) inline-6 and 302 cu in (4.9 L), 307 cu in (5.0 L), 327 cu in (5.4 L), 350 cu in (5.7 L), or 396 cu in (6.5 L) V8 powerplants. Concerned with the runaway success of the Ford Mustang, Chevrolet executives realized that their compact sporty car, the Corvair, would not be able to generate the sales volume of the Mustang due to its rear-engine design, as well as declining sales, partly due to the bad publicity from Ralph Nader's book, Unsafe at Any Speed. Therefore, the Camaro was touted as having the same conventional rear-drive, front-engine configuration as Mustang and Chevy II Nova. In addition, the Camaro was designed to fit a variety of power plants in the engine bay. The first-generation Camaro would last until the 1969 model year and would eventually inspire the design of the new retro fifth-generation Camaro.

Ford Torino : 5th Gen

For 1972, the Torino was redesigned using many characteristics carried over from the previous generation. The 1972 Torino styling emphasized the "long hood short deck" look as well as coke bottle styling more than ever before. The most radical change was a large eggcrate grille in an oval opening on Gran Torinos. Tom McCahill, stated "the gaping grille looks a little like it was patterned after Namu, the killer whale", but also stated that the Torino had "kind of pleasing, no-nonsense styling." Gran Torinos had chrome bezels surrounding the headlamps, while base Torinos had a full width argent eggcrate grille that surrounded the headlights. Base Torinos also used a unique hood and front bumper. The Torino's front fenders were aggressively flared, the rear fender line swept up towards the roof, and the windshield had a 60-degree rake. The A-pillars and roof were thinner, although the structural integrity remained the same as 1971 models. The rear featured a full width bumper that incorporated thin rectangular tail lights into each bumper end. Window glass was frameless for all models and vent windows vanished from four-door and station wagon models. All Torinos had "DirectAire" ventilation as standard equipment. The Torino incorporated new safety features for 1972, including new flush mount door handles and side door guard rails.

Ford Torino : 4th Gen

For the 1971 model year, Ford limited changes to its intermediate line to minor revisions. The biggest change for 1971 was the decision to drop the Fairlane name from the intermediate line-up all together; the Falcon name would also not return for 1971. The Torino line-up consisted of 14 models. The base model was now the "Torino", available as a 2-door hardtop, 4-door sedan and 4-door station wagon. Next was the mid-level "Torino 500", available as a 2-door hardtop and SportsRoof, 4-door sedan and hardtop and a 4-dr station wagon. The top of the line Torino remained the "Torino Brougham", available as a 2-door and 4-door hardtop, while the "Torino Squire" remained the station wagon equivalent to the Brougham. The "Torino GT" was offered as a 2-door SportsRoof and convertible, while the "Torino Cobra" was still only available as a 2-door SportsRoof.

Ford Torino : 3rd Gen

For 1970, the Torino now became the primary model and the Fairlane was a sub-series of Torino. Ford moved away from emulating the boxy lines of the full-size Fords to a completely new body for the 1970 Torino/Fairlane line influenced by coke bottle styling. Just as tailfins were influenced by jet aircraft of the 1950s, stylists such as Ford stylist Bill Shenk who designed the 1970 Ford Torino were inspired by supersonic aircraft with narrow waists and bulging forward and rear fuselages needed to reach supersonic speeds.

Ford Torino : 2nd Gen

The 1969 Fairlane/Torino saw few cosmetic changes, but there were quite a few performance oriented changes. Ford performed the typical minor styling adjustments, but overall the 1969 models were similar to the 1968 models. The grille was revised slightly, and now had a more prominent centre dividing bar, while the taillights were more square in shape than the 1968 units. All models above the Fairlane, had an aluminium dividing bar that ran across the rear panel, between the taillights and inline with the reverse lights on SportsRoof models.

Ford Torino : 1st Gen

In 1968 Ford Motor Company introduced its intermediate line with a new body and new styling. Along with the new body and styling came the new upscale series Torino. The Fairlane name continued to be used for lower level models, and the Torino was considered a sub-series to the Fairlane during this time. The 1968 Fairlane and Torino used the same wheelbases as its 1967 predecessor: 116 in (2,946 mm) on 2- and 4-door models, and 113 in (2,870 mm) for station wagon models.

Ford Mustang : 5th Gen

Ford introduced a redesigned 2005 model year Mustang at the 2004 North American International Auto Show, codenamed "S-197," that was based on the new D2C platform. Developed under the direction of Chief Engineer Hau Thai-Tang and exterior styling designer Sid Ramnarace, the fifth-generation Mustang's styling echoes the shineback Mustangs of the late 1960s. Ford's senior vice president of design, J Mays, called it "retro-futurism." The fifth-generation Mustang is manufactured at the AutoAlliance International plant in Flat Rock, Michigan.

Ford Mustang : 4th Gen

In 1994 the Mustang underwent its first major redesign in fifteen years. Code-named "SN-95" by the automaker, it was based on an updated version of the rear-wheel drive Fox platform called "Fox-4." The new styling by Patrick Schiavone incorporated several styling cues from earlier Mustangs. For the first time since 1974, a hatchback coupe model was unavailable.

Ford Mustang : 3rd Gen

The 1979 Mustang was based on the longer Fox platform (initially developed for the 1978 Ford Fairmont and Mercury Zephyr). The interior was restyled to accommodate four people in comfort despite a smaller rear seat. Body styles included a coupé, (notchback), hatchback, and convertible. Available trim levels included L, GL, GLX, LX, GT, Turbo GT (1983–84), SVO (1984–86), Cobra (1979–81; 1993), and Cobra R (1993).

In response to slumping sales and escalating fuel prices during the early 1980s, a new Mustang was in development. It was to be a variant of the Mazda MX-6 assembled at AutoAlliance International in Flat Rock, Michigan. Enthusiasts wrote to Ford objecting to the proposed change to a front-wheel drive, Japanese-designed Mustang without a V8 option. The result was a major facelift of the existing Mustang in 1987, while the MX-6 variant became the 1989 Ford Probe.

Ford Mustang : 2nd Gen

Lee Iacocca, who had been one of the forces behind the original Mustang, became President of Ford Motor Company in 1970 and ordered a smaller, more fuel-efficient Mustang for 1974. Initially it was to be based on the Ford Maverick, but ultimately was based on the Ford Pinto subcompact.

The new model, called the "Mustang II", was introduced two months before the first 1973 oil crisis, and its reduced size allowed it to compete against imported sports coupés such as the Japanese Toyota Celica and the European Ford Capri (then Ford-built in Germany and Britain, sold in U.S. by Mercury as a captive import car). First-year sales were 385,993 cars, compared with the original Mustang's twelve-month sales record of 418,812.

Ford Mustang : 1st Gen

As Lee Iacocca's assistant general manager and chief engineer, Donald N. Frey was the head engineer for the T-5 project—supervising the overall development of the car in a record 18 months—while Iacocca himself championed the project as Ford Division general manager. The T-5 prototype was a two-seat, mid-mounted engine roadster. This vehicle employed the German Ford Taunus V4 engine and was very similar in appearance to the much later Pontiac Fiero.

It was claimed that the decision to abandon the two-seat design was in part due to the low sales experienced with the 2-seat 1955 Thunderbird. To broaden market appeal it was later remodeled as a four-seat car (with full space for the front bucket seats, as originally planned, and a rear bench seat with significantly less space than was common at the time). A "Fastback 2+2" model traded the conventional trunk space for increased interior volume as well as giving exterior lines similar to those of the second series of the Corvette Sting Ray and European sports cars such as the Jaguar E-Type. The "Fastback 2+2" was not available as a 1964½ model, but was first manufactured on August 17, 1964.

Oldsmobile 442

The Oldsmobile 442 (pronounced four-four-two) was a muscle car produced by the Oldsmobile division of General Motors. It was introduced as an option package for F-85 and Cutlass models sold in the United States beginning with the 1964 model year. It became a model in its own right from 1968 to 1971, then reverted to an option through the mid-1970s. Oldsmobile revived the name in the 1980s on the rear-wheel drive Cutlass Supreme and early 1990s as an option package for the new front-wheel drive Cutlass.

AMC Javelin

The AMC Javelin is a pony car that was built by the American Motors Corporation between 1967 and 1974 in two generations, model years 1968-1970 (with a separate design in 1970) and 1971-1974. The sporty Javelins came only as two-door hardtop (with no "B" pillar) body style, and were available in economical versions or as high-performance muscle cars.

The Javelins competed successfully in Trans-Am racing and won the series with AMC sponsorship in 1971, 1972, 1973 and independently in 1975.

The second-generation AMX version was the first pony car to be used as a normal highway patrol police car by any U.S. organization.

In addition to manufacture in Kenosha, Wisconsin, Javelins were also assembled under license in Germany, Mexico, Venezuela, and Australia, as well as sold in other international markets.

Mercury Cyclone

The Mercury Cyclone was produced from 1964 to 1971, beginning as an option for the 1964 Mercury Comet, and continuing as a Mercury Comet Cyclone until 1968 when the Comet part of the name was dropped, and it became the Mercury Cyclone. After 1971 it became the "performance" model of Mercury Montego (Mercury Montego Cyclone). The Mercury Montego already had a performance model called Cyclone since 1968.

Plymouth Road Runner

The Plymouth Road Runner was a muscle car built by the Plymouth division of the Chrysler Corporation in the United States between 1968 and 1980. In 1968, the first muscle cars were, in the opinion of many, moving away from their roots as relatively cheap, fast cars as they gained options. Although Plymouth already had a performance car in the GTX, designers decided to go back to the drawing board and reincarnate the original muscle car concept. Plymouth wanted a car able to run 14-second times in the quarter mile (402 m) and sell for less than US$3000. Both goals were met, and the low-cost muscle car hit the street. The success of the Road Runner would far outpace the upscale and lower volume GTX, with which it was often confused.

The Buick Gran Sport or GS was a high-performance option package available on a number of Buick models, including the Riviera, Skylark, Century and Wildcat. A special version of one model was given the package's name as its model name.

Buick touted the California as "The Distinctive Personal Car for Americana on the GO". The merchandising creation of the West Coast's Mickey Garrett, the California GS became one of Buick's entries into what is now often known as a junior musclecar. The intent of these autos were to provide the visual impact of the era's supercars with the low maintenance and price of a more economical car, while maintaining reasonable performance levels. When reviewed with these thoughts in mind the California GS delivered quite nicely. They were fitted with the small block GS drivetrain and the exterior received the full treatment including vinyl top, chrome moulding package, GS emblems, and special California scripts.

AMC Machine

The Machine is an automobile (2,326 built in 1970) produced by American Motors Corporation (AMC). It is a muscle car version of the AMC Rebel. The Machine featured factory performance enhancements with serious power at a budget price.

The Machine was announced to dealers by then Vice-President William Pickett on August 5, 1969. The letter stated the company's intention to finish all of the first one thousand Machine with the "Red Streak" graphics kit, making it one of the most distinctive cars ever built by any company at any time. Each dealer could commit to one Rebel Machine and advised to display in their showrooms, not on their lots. One known exception to this was Empire Motors in Sudbury, Ontario.

Plymouth Barracuda

The Plymouth Barracuda is a two-door car that was manufactured by the Plymouth division of the Chrysler Corporation from 1964–1974.

The first-generation Barracuda, a fastback A-body coupe based on the Plymouth Valiant, had a distinctive wraparound back glass and was available from 1964–1966.

The second-generation 1967–1969 Barracuda, though still Valiant-based, was heavily redesigned. Second-generation A-body cars were available in fastback, notchback, and convertible versions.

The 1970–1974 E-body Barracuda, no longer Valiant-based, was available as a coupe and a convertible, both of which were very different from the previous models. The final model year for the Barracuda was 1974.

Mercury Cougar

The Mercury Cougar is an automobile which was sold under the Mercury brand of the Ford Motor Company's Lincoln-Mercury Division from 1967 to 2002. The name was first used in 1967 and was carried by a diverse series of cars over the next three decades. As is common with Mercury vehicles, the Cougar shared basic platforms with Ford models. Originally this was the Mustang, but later versions of the Cougar were based on the Thunderbird, and the last was a version of the Contour/Mondeo. The Cougar was important to Mercury's image for many years, and advertising often identified its dealers as being "at the sign of the cat." Female models holding big cats on leashes were used on Cougar ads in the early 1970s. The car was assembled at the Dearborn Assembly Plant (DAP) (one of six plants within the Ford Rouge Center) in Dearborn, Michigan from 1967 to 1973, at the San Jose Assembly Plant in Milpitas, California from 1968 into early 1969 and at the Lorain Assembly Plant (LAP) in Lorain, Ohio from 1974 to 1997.

Pontiac Firebird

The Pontiac Firebird was built by the Pontiac division of General Motors between 1967 and 2002. The Firebird was introduced the same year as the automaker's platform-sharing model, the Chevrolet Camaro. This coincided with the release of the 1967 Mercury Cougar, which shared its platform with another pony car, the Ford Mustang.

The vehicles were powered by various four-cylinder, six-cylinder, and V8 engines sourced from several GM divisions. While primarily Pontiac-powered until 1977, Firebirds were built with several different engines from nearly every GM division until 1982 when GM began to discontinue engines it felt were unneeded and either spread successful designs from individual divisions among all divisions or use new engines of corporate architecture.

Ford Torino

The Ford Torino is an intermediate automobile produced by the Ford Motor Company for the North American market between 1968 and 1976. The car was named after the city of Turin (Torino, in Italian), which is considered the Detroit (primary automobile production city) of Italy. The Torino was initially an upscale version of the intermediate sized Ford Fairlane, which Ford produced between 1962 and 1970. After 1968, the Fairlane name was retained for the base models with lower levels of trim than those models which wore the Torino name. During this time, the Torino was considered a subseries to the Fairlane. By 1970 Torino had become the primary name for Ford's intermediate, and the Fairlane was now a subseries of the Torino. In 1971 the Fairlane name was dropped altogether and all Ford intermediates were called Torino. This name was one of several originally proposed for the Mustang while in development. The Torino was essentially a twin to the Mercury Montego line.

Most Torinos were conventional cars, and generally the most popular models were the 4-door sedans and 4-door hardtops. However, Ford produced some high-performance versions of the Torino by fitting them with large powerful engines, such as the 428 cu in (7.0 L) and 429 cu in (7.0 L) "Cobra-Jet" engines. These cars are classified as muscle cars. Ford also chose the Torino as the base for its NASCAR entrants, and it has a successful racing heritage.

Chevrolet Chevelle

The Chevrolet Chevelle was a mid-sized automobile produced by the Chevrolet division of General Motors in three generations for the 1964 through 1977 model years. Part of the GM A-Body platform, the Chevelle was one of Chevrolet's most successful nameplates. Body styles include coupes, sedans, convertibles and station wagons. Super Sport versions were produced through the 1973 model year, and Lagunas from 1973 through 1976. After a three year absence, the El Camino was reintroduced as part of the new Chevelle lineup. The Chevelle also provided the platform for the Monte Carlo introduced in 1970. The Malibu, the top of the line model through 1972, replaced the Chevelle nameplate for the redesigned, downsized 1978 models.

Dodge Charger

The Dodge Charger is an American automobile manufactured by the Dodge division of Chrysler. There have been several different Dodge vehicles, built on three different platforms and sizes, all bearing the Charger nameplate. The name is generally associated with a performance model in the Dodge range; however, it has also adorned subcompact hatchbacks, full-sized sedans, and personal luxury coupes.

Pontiac GTO

The Pontiac GTO is an automobile built by Pontiac Division of General Motors in the United States from 1964 to 1974, and by GM subsidiary Holden in Australia from 2004 to 2006. It is considered an innovative, and now classic muscle car of the 1960s and 1970s. From 1964 until midway through 1973 it was closely related to the Pontiac Tempest/LeMans and for the 1974 model year it was based on the Pontiac Ventura. The 21st century GTO is essentially a left-hand drive Holden Monaro, itself a coupe variant of the Holden Commodore.

Chevrolet Camaro

The Chevrolet Camaro is an automobile manufactured by General Motors under the Chevrolet brand, classified as a pony car and some versions also as a muscle car. It went on sale on September 29, 1966, for the 1967 model year and was designed as a competing model to the Ford Mustang. The car shared its platform and major components with the Pontiac Firebird, also introduced for 1967.

Four distinct generations of the Camaro were developed before production ended in 2002. The nameplate was revived again on a concept car that evolved into the fifth-generation Camaro; production started on March 16, 2009.

Dodge Challenger

The Dodge Challenger is the name of three different generations of automobiles marketed by the Dodge division of Chrysler.

The first generation Dodge Challenger was a pony car built from 1970 to 1974, using the Chrysler E platform and sharing major components with the Plymouth Barracuda. The second generation, from 1978 to 1983, was a badge engineered Mitsubishi Galant Lambda. The third, and current generation, was introduced in 2008 as a rival to the evolved fifth generation Ford Mustang and the reintroduced fifth generation Chevrolet Camaro.

Ford Mustang

The Ford Mustang is an automobile manufactured by the Ford Motor Company. It was initially based on the second generation North American Ford Falcon, a compact car. Introduced early on April 17, 1964, dubbed as a "1964½" model by Mustang fans, the 1965 Mustang was the automaker's most successful launch since the Model A. The model is Ford's third oldest nameplate in production and has undergone several transformations to its current fifth generation.

The Mustang created the "pony car" class of American automobiles—sports car-like coupes with long hoods and short rear decks—and gave rise to competitors such as GM's Chevrolet Camaro, AMC's Javelin, and Chrysler's revamped Plymouth Barracudas and Dodge Challengers. It also inspired coupés such as the Toyota Celica and Ford Capri, which were exported to the United States.

Muscle Collectibility

The original "tire-burning" cars, such as the AMC Machine, Buick Gran Sport, Dodge Charger R/T, Ford Mustang, Oldsmobile 4-4-2, Plymouth GTX, and Pontiac GTO, are "collector's items for classic car lovers". Reproduction sheet metal parts and, in some cases, even complete body shells are available.

Modern Muscle in America

In the late 1980s, there was resurgence in ponycar popularity with the Chevrolet Camaro and the Ford Mustang, and in the early 1990s Fords SVT (Special Vehicle Team) program wanted to increase the power and performance. Ford’s 1995 SVT Cobra R was the first 300-horsepower vehicle, but was limited to 250 models. The GM and Ford market rivalry continued throughout the late 1990s, where Mustang Cobra and Camaro SS were both rated at 300+ horsepower for standard production models.

South African Muscle

In South Africa, Chevrolet placed the Z28 302 Chevrolet smallblock into a Vauxhall Viva coupe bodyshell and called it the Firenza CanAm. Basil Green produced the 302 Windsor–powered Capri Perana. In addition, Australian HT and HG GTS Monaros (1969–71) were exported in CKD form and were given a new fascia and rebadged as the Chevrolet SS, which were sold until about 1973. Falcon GTs were also exported to South Africa and rebadged as Fairmont GTs. The Australian XW Falcon GT was called the 1970 Fairmont GT, and the XY Falcon GT was called the Fairmont GT. The Falcons were re-badged as Fairmonts because of the bad reputation of the American Falcons at the time. The Fairmonts were almost the same as their Australian cousins apart from a few cosmetic differences.

Australian Muscle

Australia developed its own muscle cars around the same period, the big three manufacturers being Ford Australia, Holden or Holden Dealer Team (by then part of General Motors), and Chrysler Australia. The cars were specifically developed to run in the Armstrong 500 (miles) race and later the Hardie Ferodo 500. The demise of these cars was brought about by a change in racing rules requiring that 200 examples had to be sold to the general public before the car could qualify (homologation). In 1972, the government banned supercars from the streets^{[citation needed]} after two notable cases. The first instance was a Wheels magazine journalist driving at 150 mph (240 km/h) in a 1971 Ford XY Falcon GTHO Phase III 351 cu in (5.8 L).^[39] While the car was getting exposure in the press, the second incident occurred in George Street, Sydney, when a young male was caught driving at an estimated 150 mph (240 km/h) through the busy street in a 1971 Ford Falcon GTHO Phase III, drag racing a Holden Monaro GTS 350. This was known in Australia as "The Supercar scare".

Into Drag Race

Muscle cars attracted young customers into showrooms, and they bought the standard editions of these mid-size cars. To enhance the "halo" effect of these models, the manufacturers modified some of them into turn-key drag racers.

Ford built 200 lightweight Ford Galaxies for drag racing in 1963. All non-essential equipment was omitted. Modifications included fiberglass panels, aluminum bumpers, traction bars, and a competition-specification 427 cu in (7.0 L) engine factory rated at a conservative425 hp (317 kW; 431 PS). This full-size car could run the quarter mile in a little over 12 seconds. Also built in 1963 were 5,000 road-legal versions that could be used as every day drivers (Ford claimed 0-60 in less than 6 seconds for the similarly powered 1966 Galaxie 500XL 427).

The Muscle Grows

Other manufacturers showcased performance hardware in flashy limited-edition models. Chrysler led the way with its 1955 C-300, an inspired blend of Hemi power and luxury-car trappings that became the new star of NASCAR. With 300 horsepower (224 kW), it was advertised as "America's Most Powerful Car".

Capable of accelerating from 0 to 60 mph (97 km/h) in 9.8 seconds and reaching 130 miles per hour (209 km/h), the 1955 Chrysler 300 is also recognized as one of the best-handling cars of its era. Two years later, the Rambler Rebel was the fastest stock American sedan, according to Motor Trend.

Former Muscle Cars

Opinions on the origin of the muscle car vary, but the 1949 Oldsmobile Rocket 88, created in response to public interest in speed and power, is often cited as the first muscle car. It featured America's first high-compression overhead valve V8 in the smaller, lighter Oldsmobile 76/Chevy body for six-cylinder engines (as opposed to bigger Olds 98 luxury body).

Musclecars magazine wrote: "[t]he idea of putting a full-size V8 under the hood of an intermediate body and making it run like Jesse Owens in Berlin belongs to none other than Oldsmobile... [The] all-new ohv V8...Rocket engine quickly found its way into the lighter 76 series body, and in February 1949, the new 88 series was born."

Between Muscle & Pony Cars

The following is a list of muscle cars and their manufacturers (along with each make's corresponding pony car, where applicable):

Manufacturer	Pony car	Muscle car
AMC	Javelin SST	Machine
Buick	none	Gran Sport
Chevrolet	Camaro	Chevelle SS
Dodge	Challenger	Charger RT
Ford	Mustang	Torino GT
Mercury	Cougar	Cyclone CJ
Oldsmobile	none	442
Plymouth	Barracuda	Road Runner
Pontiac	Firebird	GTO

 

The American Muscle Car

Muscle car is a term used to refer to a variety of high-performance automobiles. The Merriam-Webster dictionary defines muscle cars as "any of a group of American-made 2-door sports coupes with powerful engines designed for high-performance driving." A large V8 engine is fitted in a 2-door, rear wheel drive, family-style mid-size or full-size car designed for four or more passengers. Sold at an affordable price, muscle cars are intended for mainly street use and occasional drag racing. They are distinct from two-seat sports cars and expensive 2+2 GTs intended for high-speed touring and road racing. Developed simultaneously in their own markets, muscle cars also emerged from manufacturers in Australia, South Africa, the United Kingdom, and elsewhere.

According to Muscle Cars, a book written by Peter Henshaw, a "muscle car" is "exactly what the name implies. It is a product of the American car industry adhering to the hot rodder's philosophy of taking a small car and putting a large-displacement engine in it. The Muscle Car is Charles Atlas kicking sand in the face of the 98 hp (73 kW) weakling." Henshaw further asserts that the muscle car was designed for straight-line speed, and did not have the "sophisticated chassis", "engineering integrity", or "lithe appearance" of European high-performance cars.

However, opinions vary as to whether high-performance full-size cars, compacts, and pony cars qualify as muscle cars.